View STPS1L30UPBF_1319201.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin PD-20405 07/04
STPS1L30UPBF
SCHOTTKY RECTIFIER 1 Amp
IF(AV) = 1.0 Amp VR = 30V
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM @ tp= 5 ms sine VF TJ @ 1.0Apk, TJ= 125C range
Description/ Features Units
A V A V C The STPS1L30UPBF surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix)
Value
1.0 30 360 0.30 - 55 to 150
Case Styles STPS1L30UPBF
SMB
www.irf.com
1
STPS1L30UPBF
Bulletin PD-20405 07/04
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
STPS1L30UTRPbF
30
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current Non- Repetitive Avalanche Energy Repetitive Avalanche Current
Value
1.0 360 75 3.0 1.0
Units Conditions
A A 50% duty cycle @ TL = 106 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse mJ A TJ = 25 C, IAS = 1A, L = 6mH Current decaying linearly to zero in 1 sec Frequency limited by T J max. Va = 1.5 x Vr typical Following any rated load condition and with rated V RRM applied
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop (1)
Value
0.420 0.470 0.300 0.375
Units
V V V V mA mA mA pF nH V/s @ 1A @ 2A @ 1A @ 2A TJ = 25 C TJ = 100 C TJ = 125 C
Conditions
TJ = 25 C TJ = 125 C
IRM
Max. Reverse Leakage Current (1)
0.2 5.0 15
VR = rated V R
CT LS
Max. Junction Capacitance Typical Series Inductance
200 2.0 10000
VR = 5VDC, (test signal range 100KHz to 1Mhz) 25C Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change (Rated VR)
(1) Pulse Width < 300s, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Storage Temperature Range (**) 80 C/W DC operation
Value
- 55 to 150 25
Units
C C C/W DC operation
Conditions
Max. Junction Temperature Range (*) - 55 to 150
RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight Case Style Device Marking
(*) dPtot
0.10 (0.003) g (oz.) SMB IR13L Similar to DO-214AA
1 < thermal runaway condition for a diode on its own heatsink dTj Rth( j-a) (**) Mounted 1 inch square PCB
2
www.irf.com
STPS1L30UPBF
Bulletin PD-20405 07/04
10
10
R everse Current - IR (mA)
TJ = 125C 1 100C 75C 50C 0.01 25C 0.001
0.1
Instantaneous Forward Current - IF (A)
0.0001
0
10
20
30
TJ = 125C TJ = 25C 1
Reverse Voltage - VR (V)
Fig. 2 - Typical Peak Reverse Current Vs. Reverse Voltage
1000 Junc tion Capa citance - C T (pF )
T = 25C J 100
0.1
0
0.2
0.4
0.6
0.8
Forward Voltage Drop - VFM (V)
10
Fig. 1 - Maximum Forward Voltage Drop Characteristics
0
10
20
30
Reverse Voltage - V (V) R
Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
www.irf.com
3
STPS1L30UPBF
Bulletin PD-20405 07/04
130
0.5 Average Power Loss - (Watts)
Allowable Lead Temperature (C)
DC 120
0.4
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMSLimit
110
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
0.3
0.2
100
S quare wave (D = 0.50) 80% R ated VR applied
see note (2)
0.1
90 0 0.4 0.8 1.2 1.6
0 0 0.4 0.8 1.2 1.6
Average Forward Current - I F(AV) (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature
Average Forward Current - I F(AV) (A)
Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current
Non-Repetitive Surge Current - I FSM (A)
1000
100
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge
10 10
100
1000
10000
Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = VR1 x I R (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
STPS1L30UPBF
Bulletin PD-20405 07/04
Outline Table
Device Marking: IR13L
CATHODE ANODE
2.15 (.085) 1.80 (.071)
3.80 (.150) 3.30 (.130)
1
2
4.70 (.185) 4.10 (.161)
1
POLARITY
2 PART NUMBER
2.40 (.094) 1.90 (.075) 1.30 (.051) 0.76 (.030) 0.30 (.012) 0.15 (.006) 5.60 (.220) 5.00 (.197)
2.5 TYP. (.098 TYP.)
SOLDERING PAD
2.0 TYP. (.079 TYP.)
4.2 (.165) 4.0 (.157)
Outline SMB Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994
Marking & Identification
Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID.
IR13L
IR13L
VOLTAGE CURRENT
IR LOGO
PYWWX
SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free"
www.irf.com
5
STPS1L30UPBF
Bulletin PD-20405 07/04
Tape & Reel Information
Dimensions in millimetres and (inches)
Ordering Information Table
Device Code
STPS
1 1 2 3 4 5 6
1
2 -
L
3
30
4
U
5
PbF
6
Schottky STP Series Current Rating (1 = 1 A) L = Low Forward Voltage Voltage Rating (30 = 30V) U = SMB none = Standard Production PbF = Lead-Free Tape & Reel only (3000 pieces)
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Leve and Lead-Free. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/04
6
www.irf.com

▲Up To Search▲

Price & Availability of STPS1L30UPBF

	To Download STPS1L30UPBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .